Video System: PAL Colour fully
compatible with Australian TV System.
Image
Device: 752 (H) x 582 (V) 437 664 Pixel
LOW
BLEMISH 1/4" inch SONY Super HAD MicroLens Interline
Transfer CCD Sensor.
click on image
to enlarge
Lens: Motorised
Focus/Zoom/Iris, 23X Optical ZOOM, focal length 3.8 mm ~ 87.4
mm, Automatic Iris, Automatic / Manual Focus, 64 Zoom / Focus
Positions.
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal or
Line Lock with Phase adjustment (24 vac operation).
Video Output (1): 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket.
Video Output (2): 1.14 V p-p
Composite Video 100 ohms balanced via 8P8C (RJ45 8P) socket for
use with Cat-5/6 UTP LAN Cable and compatible with all Composite
Video BalUns
on this page.
Horizontal Pixels: 750 + (this
value is provided for comparative purposes only) Better than
Super-VHS resolution.
Sensitivity: ~ 0.03 lux @ F1.6
50 IRE in Night Mode (without IR CUT filter) AGC On, more
sensitive using Digital Slow Shutter (Frame Integration),
these values are provided for comparative purposes only..
Movable Infrared Optical
Filter:
 more
In
Day mode (well lit, colour) mechanism
automatically positions IR-CUT optical filter between Lens and
Image Sensor to exclude Infrared radiation that would otherwise
adversely affect colour reproduction, this ensures
colour rendition not possible with
ordinary non-filtered or notch-filter type Day/Night cameras.
In Night mode (low light,
monochrome)
mechanism automatically removes IR-CUT
optical filter to allow Infrared radiation to pass boosting low
light and Infrared sensitivity, the result is significantly
better night images using an
Infrared Illuminator or with Infrared
rich light sources.
Infrared Response
without Infrared filter is ~ 700 to ~
1100 nm better than a
'CCTV
notch IR Filter',
additional
CCTV Infrared Night Vision information.
Automatic Electronic Shutter
(AES): 1/50 to 1/100 000 second or Fixed 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000 or 1/10000 additional information
here. (see Frame-Integration below).
Frame-Integration: Digital Slow Shutter
Off, 6, 12, 16, 18, 22, 24, 30 or 36 Frames,
Due to the nature of Frame
Integration clear images of moving objects may not be possible.
Automatic Gain Control (AGC):
On/Off, 0 ~ 24 dB 9 steps.
Signal to Noise ratio: ~ 48
dB, measured with AGC off.
Back-Light Compensation (BLC):
On/Off, 48 zones.
RS485: PELCO™-D
Protocol 2400 bps for control of Zoom, Focus & Iris.
When used with
Wireless Video Two-Way Audio RS485 Alarm I/O Web Cam Server
Video Recorder select EP Pelco-D 2400
bps. When used with
version 1 (< 21/07/08) of PTZFa-TX485 to address Camera
press Clear, enter Camera #, press CAM * to access OSD enter 64,
press CALL, use Joystick to emulate Up/Down/ENT/Exit keys on
rear of Camera.
IMPORTANT CAMERA OSD is not accessible using standard
Pelco CALL 95 command, Camera OSD requires CALL 64.
White Balance: ATW / AWB /
OFF.
Other Functions:
Title, ALC, Enhancer, Zoom/Focus Speed,
Horizontal/Vertical Reverse, Gamma, Mask, Freeze, Cross Line,
Language, Positive/Negative, + more for:
'Pages from User Manual'.
Power Requirements: 12 Volts
DC Regulated ~ 300 mA (~ 800 mA Peak when Zoom/Focus/IR-CUT
motor operates), via Screw Terminal Block. Consider cable
resistance when installing, ask us about solutions if voltage
drop is a problem with existing wiring. (Cable-2155/Skt
2.1 x 5.5 mm Socket on Cable for use with
20
Metre Cable or
Power
Supply)
Dimensions: ~ 67 mm Wide, ~ 78
mm High, ~ 127 mm Deep including Mounting Base & Connectors, ~
450 grams.
Made in: Taiwan.
Manufacturer's Experience: 15
+ Years, ISO 9001 Certified. |
Ideal
for use with 720 H-Pixel
