Network over Coaxial Cable use existing composite video coax (from a legacy analogue CCTV video camera system) for transmission of IP Network Camera or Video Server signals with RG59 cable BalUn-Coax exceeds IEEE 802.3 10BaseT NEXT specification working range up to 200 meters at 10Mbps Passive no power required isolates the receiver from the transmitted signal
Ethernet / IP / Network over Coaxial Cable "RJ45 to Coax to RJ 45 Converter"
 easily upgrade from Composite Video CCTV to "IP Network CCTV Camera / Server"
 
Network over Coaxial Cable use existing composite video coax (from a legacy analogue CCTV video camera system) for transmission of IP Network Camera or Video Server signals with RG59 cable BalUn-Coax exceeds IEEE 802.3 10BaseT NEXT specification working range up to 200 meters at 10Mbps Passive no power required isolates the receiver from the transmitted signal
Use coaxial cable for IP Network Cameras Video Servers with RG59 they exceed the IEEE 802.3 10BaseT NEXT specification up to 200 meters 10Mbps no power required isolates receiver from transmitted signal
Low cost easy speedy solution utilise existing composite video coax for IP Network Camera Video Server signals with RG59 cable up to 200 meters 10Mbps passive no power required RJ45 jack for Network BNC female for RG59 Coaxial Cable
Network over Coaxial Cable use existing composite video coax (from a legacy analogue CCTV video camera system) for transmission of IP Network Camera or Video Server signals with RG59 cable BalUn-Coax exceeds IEEE 802.3 10BaseT NEXT specification working range up to 200 meters at 10Mbps Passive no power required isolates the receiver from the transmitted signal

This is a low cost, easy and speedy solution to allow you to utilise existing composite video coax (from a legacy analogue CCTV video camera system) for transmission of IP Network Camera or Video Server signals.

Used in pairs with RG59 cable they exceed the IEEE 802.3 10BaseT NEXT specification.

Working range up to 200 meters maximum at 10 Mbps speed.

Passive, no power required.

This Ethernet over Coax converter exceeds 802.3 10BaseT NEXT specification, isolating the receiver from the transmitted signal.

IPoverCoax $79 pair Taiwan Quality

Input / Output: BNC female connector, RJ45 Jack for Network / Camera / Video Server / etc.

Cable: RG59, Coaxial Cable Center = Data (+), Shield = Data (-).

Impedance: 50Ω to dual 100Ω or 75Ω to dual 100Ω or 93Ω to dual 100Ω

Crosstalk: > 30 dB.

Dimensions / Weight: ~ 24 mm (W) ~ 20 mm (H) 66 ~ 69 mm (L) including BNC socket, 32 ~ 40 grams.

Results (range) may vary depending on signal levels, Cable: Quality / Condition / Characteristics, Connectors and Joins.